The glass fiber rebar forming machine is a new type of equipment for producing glass fiber rebars. It can process different types of full-thread glass fiber reinforced ribs. It is mainly composed of extrusion system, pre-forming system, winding system, baking box, hydraulic pulling traction, and electrical Control system, automatic cutting and other systems.

  • Shipping: 

Learn More

Glass fiber reinforcement production process

The glass fiber yarn placed on the creel passes through the silk board and is sent to the dipping tank due to the function of the tail traction system. There is resin in the feeding tank. The glass fiber yarn is filled with resin in the feeding tank, and then passes through The preforming system is assembled into a bundle, heated and melted by a heater in the mold, and extruded by a hydraulic system. After passing through the winding system, it becomes a full-threaded glass fiber plastic rod body (at the front end of the feed tank, preforming system, and winding system). There is a silicone sheet to ensure that the rod body is smooth and free of bubbles) and then enter the drying system for curing, and finally cut the rod body to the required length through the cutting assembly, and finally pass the inspection by the quality controller and put it into storage.

Use conditions of glass fiber rebar forming machine

The working environment of the FRP bolt forming machine is: working temperature 15-30℃, working humidity 20-80℃