FRP Rebar Pultrusion Machine produce 6mm-36mm Fiberglass Bars with High Output and Low energy consumption
Glassfiber Rebar Pultrusion Machine/GFRP Bars Making Machine
|GFRP Rebar Making Machine|
|1||Haul off Way||Rubber Block/Belt|
|3||Speed mode||Frequency/Servo Control|
|4||Transfer method||Sprocket drive|
|5||Production Speed||0.5 ~ 2m/mim|
|7||Applicable Products||Frp Screw Rod/Glass fiber reinforced ribs|
Because this equipment is a customized product, the above parameters are for reference only, please contact us if you need precise details
This FRP Rebar Pultrusion Making Machine equipment is a special machine for producing glass fiber reinforced materials. It is mainly made of fiber materials as reinforcement materials, resin as the body, adding a certain amount of additives, and drying and curing fiber products at a certain temperature.
1. The FRP Rebar Making Equipment is composed of creel, dipping device, winding device, heating device, traction device, cutting device, electric cabinet and pneumatic system.
2. The winding device adopts flexible winding wire, which will not cut the surface fiber structure.
The 3 yarn content can reach 80%, which greatly improves the mechanical properties of the rod body and reduces the product cost.
4. Automatic cutting, automatic unloading, saving a lot of labor costs.
5. It has a pre-heating function, which improves the curing effect and can smoothly produce rods with a diameter of 25mm or more.
6. The degree of automation is extremely high. The material trough, the pressure rod, the winding, the drying tunnel, and the traction are pneumatically controlled. All operations can be completed by operating the buttons on the electric cabinet.
9. The dust collector protects the environment and the health of the operator.
10. It adopts a closed type, beautiful and generous, has a heat preservation effect, and does not affect the operation.